PVC Coupling connected to plastic pipe SWD-DF06

  • Item: UPVC/CPVC Different Standards Coupling/Socket
  • Item No.: SWD-DF06
  • Lead time: 30 days around
  • Port: Ningbo or Shanghai
  • MOQ: 20ctns
  • Pakcage: Carton
  • Deliver: Ocean or Express
  • Place of origin: China
Request A Quick Quote

描述

SizeDN15 1/2″ – DN250/10″
MaterialUPVC/CPVC
ColourGray/Transparent
ConnectionSOCKET
Working PressurePN16/235PSI
StandardDIN,ANSI,JIS

 

Due to the limitations of the site and transport vehicles, many plastic pipes are usually 5.8 meters in length. To achieve this, need PVC Coupling pipes, Plastic pipes usually use two joining methods.

1.One is to use PVC  coupling to bond the tubing to the ends of the fitting by glue, which is often referred to as a cold joint. The advantage is that the operation is quick and convenient. The downside is that if the connection is not good, a leak will occur. The materials used for cold joining are usually UPVC, CPVC, PP.

2. The second method is to use a hot melt device to heat the pipes and fittings in the mold to the melting point so that they can fuse together and then cool. This method is often referred to as a hot connection. The advantage is that the connection is more sealed. The disadvantage is that the operation is cumbersome and requires special machines and molds. Usually, the pipe of this joining method is PPR, HDPE.

NOMINALSCOKET TYPESTRUCTURAL DIAMETER
SIZEd1d2lDdH
2020.320.116271737
2525.325.119332342
3232.332.122412949
4040.340.126503757
5050.350.132614768
6363.363.138756082
7575.375.144927295
9090.390.151110.687.1108
110110.4110.161127106.1130
140140.5140.277162133162
160160.5160.286186154180
200200.6200.2130240185268
225225.7225.3130261218268
250250.8250.3145290239300

 

 

Drawing of Coupling